The BM5A MKII imparts all of the quality and power that you've come to expect from Dynaudio Professional but they have been re-engineered to take nearfield monitoring to new levels of performance. New features include the handmade drivers that offer the best in quality and accuracy. The woofer offers longer excursions so stays linear for longer, resulting in a cleaner, tighter bass response.
This louder and more accurate bass is matched at the top end with a high-resolution soft dome tweeter that delivers an unparalleled response. The added waveguide ensures less acoustical reflections and a more accurate sweet spot for the listener, resulting in a much better monitoring experience.
The drivers are matched perfectly to the BM 5A MKII's custom designed dual amps to deliver maximum 117dB SPL while maintaining extraordinary sensitivity, resulting in a louder, cleaner and more accurate sound.
The three integrated analog room filters allow you adjustment and compensation of the acoustical monitor placement at both Low, Mid and High frequencies e.g. adjusting for the bass boost at corner or wall placement as well as the potential high frequency console reflections.
- Handcrafted aluminum drivers
- High-resolution 1.1" soft dome tweeter, pure aluminum voice coil
- Smooth and accurate HF waveguide
- Extended excursion 7" woofer, pure aluminum voice coil
- 2 channel 90-Watt transient power (2x 50W RMS)
- 117dB SPL peak power output
- Frequency response of 48Hz to 21kHz
- HF, MF, LF analog room filters
- High pass filters at 60/80Hz for perfect subwoofer adaption
Model - BM 5A MKII
System - Two-way Active Nearfield Monitor
Frequency Response (+/- 3 dB) - 48 Hz - 21 kHz
Max SPL 1m, pair (IEC Short Term) - 117 dB peak
Max SPL 2m, 5.1 (IEC Short Term) - 118 dB peak
Input level for 85 dB SPL @1m (+4/-10) - 100mV @ 0dB setting
Input level for max peak SPL (+4/-10) - +9dBu Peak @ 0dB setting
Power consumption - Idle: 10 W / Max: 90 W
Amplifier power - 2x 90 W Transient power (50 W RMS)
Resonance Frequency - 55 Hz
Internal Cabinet Volume - 9 liters
Bass Principle - Bass reflex
Crossover Frequencies - 1500 Hz
Crossover Slope - 6 dB/oct
Tweeter - D-281 - 28 mm soft dome, rear chamber, magnetic fluid, 4mm aluminium front
Woofer - 7 inch moulded aluminium frame, One piece thermo formed MSP cone, 75 mm pure aluminium wire voice coil
Weight - 8.7 kg / 19.2 lbs
Dimensions (W x H x D) - 186 x 320 x 320 mm / 7.3” x 12.5” x 12.5”
This BUNDLE offer includes 2 (two) monitor units and a TC Electronic TC Electronic BMC-2 DAC & Monitor controller, for a special bundle price.
BMC-2 is a dedicated Digital-to-Analog Converter and high quality ‘hands-on’ Monitor Control that’s an ideal solution for you, whatever your audio production or monitoring set-up – be it digital or analog.
A predictable, ultra-low latency speaker and headphone control is an important part of your production process, and with BMC-2 such luxury is always available to you – regardless of the state of the computer at the heart of your system.
This handy self-contained desktop unit can be operated without a Mac or PC, offering you instant and practical control of sound levels. As well as controlling the listening level, BMC-2 allows you to switch between three digital input sources – S/PDIF, AES3, TOS and ADAT, and confirm if those inputs are synchronous or not.
BMC-2 drives one set of analog speakers, one set of digital speakers and a set of headphones. Calibrated listening is available with both sets of speakers and the headphone output.
But it’s not all about DAC and Level Control – BMC-2 also puts user-definable reference levels at your fingertips. You simply hit the front panel-mounted REF button and BMC-2 will attenuate the output to a user-defined sound pressure level, so reference level monitoring is always just a single button-press away.
BMC-2 precision re-clocks all inputs, and features high performance jitter rejection based on patented JET technology that was originally developed for our flagship System 6000. All the benefits of optical interfacing without the problems – asymmetries are corrected and jitter is completely removed from the equation.
Analog output offers wide dynamic range on XLR connectors. Peak level metering and Integrity Check – or ‘iCheck’ – is also available on the selected input. iCheck reveals if the signal is spatially compromised, e.g. because of data reduction, such as MP3 or AAC encoded at too low a bit rate.
BMC-2 is a self-contained desktop unit that works right out of the box with no need for a computer for setup. It interfaces directly with all new Macs and most PCs used for audio production – just attach the supplied 12V DC power adaptor.
|Name||Dynaudio BM5A mkII x2 BUNDLE SET - incl. TC Electronic BMC-2|
|Category||Active Near Field Studio Monitor|
Order processing time
We ship worldwide on daily basis, with DHL, DPD, and UPS. All in-stock items are usually shipped within 24h upon receipt of payment, mostly on the same working day. Of course, all orders are checked by our qualified personnel and professionally packaged for shipping. Express delivery options are available upon request.
A transport insurance cover up to the full value of the purchased item(s) is already included, at no extra charge.
COD (cash on delivery)
5.00 € COD fee for shipping within Germany. Unfortunately, we currently don't ship COD to addresses outside of Germany.
Personal purchase at our store
Of course, you are absolutely welcome to personally visit our shop premises in Munich to check, test, compare, purchase and take home your items right away, without any waiting, stress or pressure, and with a proper professional advice from our product experts. Please feel free to contact us for your individual time appointment, or simply visit us during our business hours!
Shipping outside the EU
Shipping costs to most EU destinations, Switzerland and Norway are included in the overview on the left. Selling and shipping to any countries not mentioned in this overview is subject to prior inquiry and receipt of our shipping quotation. Please also note that not all orders from all countries can be automatically processed through our website at this time; such orders must be handled on individual basis. If you are outside the EU, please make sure to contact us first, for necessary details on the ordering procedure, shipping and payment. Please make sure to provide us your full address for a correct calculation of the shipping expenses.