DBM50 is the only choice when it comes to desktop monitoring.
From the handcrafted Dynaudio drivers to its beautiful exterior, DBM50 is specifically engineered to perfectly reproduce your desktop mix and truly represents a revolutionary new angle in desktop mixing.
From the innovative wave guide around the tweeter to the optional addition of the level controller that never compromises the allimportant level interrelationship between speakers, DBM50 is the perfect partner in situations where the only thing that counts is perfection.
- Front baffle tilt for perfect desktop placement
- Smooth HF waveguide securing optimal near field sweet-spot
- Handcrafted drivers, legendary Dynaudio craftmanship
- Perfect tracking Volume tabletop remote control (optional)
- 117dB SPL Peak power
- 1" High resolution soft dome tweeter
- 7.5" woofer extended excursion
- 2 channel 50 watt RMS power amplifier
- Frequency response: 46Hz to 21kHz
- HF, MF and LF room filtering
- HP filtering for optimal subwoofer adaption
- Auto standby mode
- XLR balanced and single ended RCA input connectivity
Model - DBM50
System - Two-way Active Nearfield Monitor
Frequency Response (+/- 3 dB) - 46 Hz - 21kHz
Max SPL 1m, pair (IEC Short Term) - 117 dB peak
Max SPL 2m, 5.1 (IEC Short Term) - N/A
Input level for 85 dB SPL @1m (+4/-10) - 80mV @ 0dB setting
Input level for max peak SPL (+4/-10) - -10dB: 4.8Vrms, 0dB: 1.5Vrms, +4dB: 1Vrms
Power consumption - Idle: 5.8 W / Max: 94 W
Amplifier power - Tweeter: 50 W / Woofer: 50 W
Resonance Frequency - 39 Hz
Internal Cabinet Volume - 13.9 liters
Bass Principle - Bass Reflex
Crossover Frequencies - 1500 Hz
Crossover Slope - 6 dB/oct
Tweeter - D-281 - 28 mm soft dome, rear chamber, magnetic fluid, 4mm aluminium front, Pure alu wire voice coil
Woofer - 180 mm/7.1", One-piece thermo formed MSP cone, 75mm/3" pure aluminum wire on kapton former
Weight - 7.2 kg / 15,9 lbs
Dimensions (W x H x D) - 230 x 348 x 335 mm / 9.1" x 13.7" x 13.2"
Highpass filters - 60Hz, 80Hz, Off
High Pass' Switch - Flat: 25Hz, 2nd order / 60Hz: 60Hz, 2nd order / 80Hz: 80Hz, 2nd order
LF' Switch - +2: +2 dB low shelf 150Hz / 0: Flat / -2: -2 dB low shelf 150Hz
MF' Switch - 0: Flat / -2: -2 dB notch 450Hz Q0,7 / -4: -4 dB notch 450Hz Q0,7
HF' Switch - +1: +1 dB high shelf 1,5kHz / 0: Flat / -1: -1 dB high shelf 1,5kHz
This BUNDLE offer includes 2 (two) monitor units and a TC Electronic TC Electronic BMC-2 DAC & Monitor controller, for a special bundle price.
BMC-2 is a dedicated Digital-to-Analog Converter and high quality ‘hands-on’ Monitor Control that’s an ideal solution for you, whatever your audio production or monitoring set-up – be it digital or analog.
A predictable, ultra-low latency speaker and headphone control is an important part of your production process, and with BMC-2 such luxury is always available to you – regardless of the state of the computer at the heart of your system.
This handy self-contained desktop unit can be operated without a Mac or PC, offering you instant and practical control of sound levels. As well as controlling the listening level, BMC-2 allows you to switch between three digital input sources – S/PDIF, AES3, TOS and ADAT, and confirm if those inputs are synchronous or not.
BMC-2 drives one set of analog speakers, one set of digital speakers and a set of headphones. Calibrated listening is available with both sets of speakers and the headphone output.
But it’s not all about DAC and Level Control – BMC-2 also puts user-definable reference levels at your fingertips. You simply hit the front panel-mounted REF button and BMC-2 will attenuate the output to a user-defined sound pressure level, so reference level monitoring is always just a single button-press away.
BMC-2 precision re-clocks all inputs, and features high performance jitter rejection based on patented JET technology that was originally developed for our flagship System 6000. All the benefits of optical interfacing without the problems – asymmetries are corrected and jitter is completely removed from the equation.
Analog output offers wide dynamic range on XLR connectors. Peak level metering and Integrity Check – or ‘iCheck’ – is also available on the selected input. iCheck reveals if the signal is spatially compromised, e.g. because of data reduction, such as MP3 or AAC encoded at too low a bit rate.
BMC-2 is a self-contained desktop unit that works right out of the box with no need for a computer for setup. It interfaces directly with all new Macs and most PCs used for audio production – just attach the supplied 12V DC power adaptor.
|Name||Dynaudio DBM50 x2 BUNDLE SET - incl. TC Electronic BMC-2|
|Category||Active Angled Desktop Studio Monitor|
Order processing time
We ship worldwide on daily basis, with DHL, DPD, and UPS. All in-stock items are usually shipped within 24h upon receipt of payment, mostly on the same working day. Of course, all orders are checked by our qualified personnel and professionally packaged for shipping. Express delivery options are available upon request.
A transport insurance cover up to the full value of the purchased item(s) is already included, at no extra charge.
COD (cash on delivery)
5.00 € COD fee for shipping within Germany. Unfortunately, we currently don't ship COD to addresses outside of Germany.
Personal purchase at our store
Of course, you are absolutely welcome to personally visit our shop premises in Munich to check, test, compare, purchase and take home your items right away, without any waiting, stress or pressure, and with a proper professional advice from our product experts. Please feel free to contact us for your individual time appointment, or simply visit us during our business hours!
Shipping outside the EU
Shipping costs to most EU destinations, Switzerland and Norway are included in the overview on the left. Selling and shipping to any countries not mentioned in this overview is subject to prior inquiry and receipt of our shipping quotation. Please also note that not all orders from all countries can be automatically processed through our website at this time; such orders must be handled on individual basis. If you are outside the EU, please make sure to contact us first, for necessary details on the ordering procedure, shipping and payment. Please make sure to provide us your full address for a correct calculation of the shipping expenses.