Hotone MP-350 Ampero II - CDCM HD Gen 2 Amp Modeler and Effects Processor
Features:
- Second Generation amp modeler & effects processor
- Ampero II's iconic tri-core DSP platform and ESS Sabre AD/DAs providing musical, lively Ampero sound
- Evolved CDCM HD & F.I.R.E. modeling system ensures high end tonal expressiveness and realistic playing experience
- 24-bit signal processing, up to 127dB dynamic range*
- A larger, sharper 5-inch dynamic touchscreen and newly designed system UI for smoother, more intuitive, and more convenient interaction
- Highly customizable DUAL effect chain with multiple serial/parallel signal routing support
- Add ANY effect module you like to the effect chain
- Stereo I/O jacks and stereo FX Loop jacks for further routing/tonal possibilities
- Input R with built-in mic preamp and phantom power for adapting both dynamic/condenser microphones
- Up to 12 simultaneous effect modules
- Upgraded effects library delivers 460+ effects, including Hotone's next-gen higher-quality algorithms
- CDCM HD & F.I.R.E. modeling effects including:
- 90+ amp models
- 68 cab models
- A more precise cabinet-mic algorithm based on realistic studio recording data
- New preamp models
- Independent power amp simulation
- 100+ legendary pedal models
- 60+ Hotone original effects (incl. high quality drive/dynamic/filter/mod/delay/reverb models and more)
- Tone Catch tech captures classic amplifiers/pedals, integrates with Ampero II, share via Hotone community
- Dedicated IR loader module with 3rd party IR support, up to 50 custom IR slots
- 20 classic Celestion speaker IRs included - Powered by Celestion Digital
- Supports up to 2048 IR sampling points for better tonal resolution
- Free Win/Mac software for firmware upgrading, loading/editing/managing effects/IRs, etc.
- 8-in, 8-out USB audio interface with 44.1 to 192kHz sample rate switching, supports Reamp function
- Supports recording of audio from AUX IN
- Built-in acoustic effects and presets
- 300 presets (75 banks x 4 patches)
- Built-in stereo looper with max. 60 seconds recording time and undo/redo function
- 5 different input modes with electric guitar/acoustic guitar/mic/line input support
- Independent BAL/UNBAL/Phones output processing for independent output volume control or different signal outputs
- 4 assignable footswitches with multicolor halo LEDs, with two working modes and customization support
- Built-in expression pedal supports two status switching
- Scene function providing 4 scenes in a patch – switch effect on/off and different parameters with no latency
- Built-in multi-function color LED strip lights
- Customizable main display modes and theme colors
- Authentic stereo processing
- MIDI I/O jacks and EXP/CTRL jack for expanded controls
- Constant firmware updates based on user feedback
- Road-ready, light-weight aluminum casing
- 9-18V DC power supply * Digital to analog; actual data may vary depending on usage scenarios
Specs
- Effects Digital Audio Signal Processing: 24-bit depth, 44.1kHz sample rate
- Frequency Response: 20Hz – 20kHz ± 1dB
- Dynamic Range: Max. 127 dB (digital to analog)
- Effects: 460+ (incl. global EQ)
- No. of Effect Modules: 17
- Effects Slots: Total of 12 simultaneous effects slots
- Patches: 300
- Looper Time: Stereo 60 seconds
- Inputs:
- One 1/4″ Tip Sleeve (TS) instrument jack with 3 input mode selector
- One XLR or 1/4″ (TS) combo jack with 5 input mode selector and mic preamp (max. gain
- of 52dB)
- One 1/8″ Stereo Auxiliary In (Aux In) jack
- Two 1/4″ Tip Ring Sleeve (TRS) expression pedal/momentary footswitch input
- (EXP/CTRL) jacks
- One 1/4″ Tip Ring Sleeve (TRS) unbalanced stereo FX loop return jack
- One Standard 5 pin MIDI input jack
- Outputs：
- Two 1/4″ Tip Ring Sleeve (TRS) unbalanced stereo output jacks
- Two XLR balanced stereo output jacks, with ground lift switch
- One 1/4″ Tip Ring Sleeve (TRS) unbalanced stereo FX loop send jack
- One 1/8″ stereo headphones output jack
- One Standard 5 pin MIDI output jack
- Input Impedance:
- 1/4″ Tip Sleeve (TS) Input: E.GT: 1MΩ; A.GT: 4.7MΩ; LINE: 10kΩ
- XLR Input: 5kΩ
- FX Loop Return: 100kΩ
- Aux In: 10kΩ
- Output Impedance:
- Unbalanced Output: 1kΩ
- Balanced Output: 1kΩ
- FX Loop Send: 1kΩ
- Headphones: 47Ω
- Screen: 5″ 800 x 480 Color Dynamic Display Touch Screen
- USB Port: USB 2.0 Type-C port; Supports USB Audio 2.0; Supports 44.1 to 192kHz sample rate switching
- IR Impulse Response/IR processing: Supports 24-bit/44.1kHz Mono WAV files, 1024 and 2048 points; Supports up to 50 user IRs
- Power Requirements: 9-18V DC Center Negative
- Current Consumption: 1.2A Max (9V DC)
- Dimensions: 330mm(W) x 157mm(D) x 61mm(H)
- Weight: 1695g
Hotone FS-1 Ampero Switch
The Hotone Ampero multi-effects processor proved itself to be a game changer for its huge tone, great versatility and tiny size. Since first launched, it quickly become popular among both starters and pro musicians. For the best possible portability, the footswitch amount on Ampero is limited – however for the players who want more flexibility on this unit, that's not enough…So here it comes the Ampero Switch, Ampero's best pal!
It is an ultra compact momentary footswitch controller designed not only for Ampero, but also for other devices with momentary footswitch controller support. Featuring the same Aluminum casing and appearance theme design, Ampero Switch definitely matches your Ampero's vibe perfectly. Carefully selected footswitches and other components ensure comfortable switching and excellent endurance.
Features
- Ultra-compact, lightweight dual-footswitch controller
- Your Ampero's best pal
- Can be used with other devices with external control jacks
- Momentary footswitch design – momentary footswitch support needed
- TRS Cable Included (80cm)
