Rode VideoMic Pro+

Røde VideoMic Pro+ 

• Standard hot shoe adapter
• 1/2" capacitor capsule
• Polar pattern: supercardioid
• Speech angle: approx. 45°
• Over 100 hours of operation with RØDE battery "LB-1" (included)
• Auto-on/off function – microphone turns on and off together with the camera (conditionally camera with plugin power)
• Electronic touch switches with status LEDs
• Safety Mode switchable – recording is 10 dB quieter on the right channel of the camera
• Three-stage level switch (-10 dB/0 dB/+20 dB) – for very loud, normal and quiet signal sources
• High-pass filter can be switched in two stages (75 Hz/150 Hz) – to eliminate low-frequency noise
• Presence increase switchable (7 kHz/+5 dB) – to compensate for height losses when using a fur windscreen or for even better speech intelligibility
• Output jack: 3.5mm TRS jack (double mono)
• Frequency range: 20 Hz – 20 kHz
• High sensitivity (21 mV)
• Low self-noise (14 dBA)
• Limit sound pressure level: 133 dB
• Power supply via rechargeable battery (included), 2x AA battery (not included) or USB
• Battery charging is done via USB (cable is enclosed)
• Structure-borne sound decoupling through integrated Rycote®-Lyre® vibration mount
• Mounting to the camera using an integrated standard hot shoe adapter
• 3/8" thread embedded in the base for tripod or clay rod mounting
• Length: 17.0 cm
• Weight: 122 g (without battery)