Guitar / Bass
Drums
Keys
Recording
PA
DJ
Broadcast
Mics
Signal Proc.
Cases
Cables
Accessories
Large Diaphragm MicrophonesLarge Diaphragm Microphones

Aston Microphones Spirit & Halo Reflection Filter - Bundle offer

High-performance Switchable Pattern Microphone

The Aston SPIRIT is a high-performance, switchable pattern, microphone utilising a 1” gold evaporated capsule. A switch on the mic body selects from Omni, Cardioid or Figure-of-Eight polar patterns. It is versatile enough to use with most instruments and excels on acoustic guitar and vocals. Its hand-selected capsule is teamed with high-end transformer balanced circuitry using only the best components.

The Spirit is designed to deliver a beautifully open sound with sparkling harmonics. This highly accurate microphone gives a stunningly natural and transparent recording, capturing all the detail in the high range but without adding the harshness that some condenser microphones seem to.

Wave-Form Mesh Head
The Aston Spirit has our signature wave-form mesh head. This unique design not only looks great, but delivers an unprecedented degree of protection for the heart of your microphone, the capsule. The shock resistant wave-form design allows the head of the mic to distort if given a heavy knock, and then return to its normal position, without any damage at all. It also offers a degree of off-axis rejection, helping to eliminate unwanted artefacts from your recordings.

Built In Pop Filter
Aston’s vocal condenser microphones have an exclusive mesh-knit pop filter built into the wave-form head. The random weave allows sound to pass while virtually eliminating unwanted plosives at source. It also shields against multiple wavelengths of electromagnetic radiation making our microphones ideal in critically sensitive electronic applications. This completely encapsulating, single piece, mesh cage is formed in stainless steel, so won’t rust with use, and can even be removed and washed.

End Caps
Yet another unique design element of the Aston Spirit, is the use of custom moulded end caps with integrated XLR and stand adaptor. No other mic has this. Because the internal shock absorption system is so good, you can mount the microphone directly to a stand via this built in, and interchangeable thread adapter. The design also makes Aston microphones extremely easy to repair and maintain.

Chassis
Part of the beauty of our microphones is the custom finish of each chassis. There are no mass-produced paint job finishes here… instead, each chassis is individually tumbled for up to 4 hours to give it a very hard-wearing, and extremely beautiful, finish. To perfect the look, each microphone is separately engraved with its legends, and our brand mantra… ‘The art of performance’

PCB
Superbly balanced mix of discrete and integrated electronic circuitry.
Harmonized circuit stage arrangement for easy integration from phantom power input circuitry to capsule voltage bias.
A novel non-linear voltage/current source rectification to provide controlled amplification and smooth/ clear audio.

Eco-Friendly Packaging
Protective, re-useable, environmentally sensible packaging that doesn’t cost the earth.

SPECIFICATIONS:

Transducer Type: Condenser
Acoustic Operating Principle: Pressure Gradient
Frequency Response: 20Hz – 20kHz (+/-3dB)
Equivalent Noise Level: 14dB A-Weighted
Sensitivity at 1kHz into 1kohm: 23.7mV/Pa
Maximum SPL for THD 0.5%: 138dB
Signal-to-Noise Ratio (rel. 94dB SPL): 80dB A-Weighted
Polar pattern: Omni/Cardioid/Figure-of-Eight
Pad Switches: -20dB/-10dB/0dB
Low-Cut Filter: 80Hz

 

HALO’s unique design is also patented… it’s much bigger, wraps around top and bottom to a maximum rear depth of almost 100mm to improve room isolation and absorption without dominating the room sound. Its textured and wave-formed surface also helps diffuse direct sound.

Market research revealed that many people have a hard time with getting a good performance when using other reflection filters because they are not very ‘creative-friendly’ environments. The HALO’s form and colour scheme is designed to create a more ‘organic-feeling’ space for the performer to work with.

The combination of radically improved performance in almost every area of currently available technology, while paying special attention to both the green credentials of our manufacturing (as with our mic packaging which is 100% recyclable and 84% recycled material), and to the creative element that the artist requires in their performance environment to get the best form every take, makes, in our opinion, the very best possible solution for portable room acoustics available today.

Hi-Tech construction with Patented Pet Felt

The HALO is made from a patented PET felt which is one of the most lightweight and efficient, technical acoustic products available on the global market today, making it ideal for use in a reflection filter.

An additional side benefit is that the acoustic felt which makes up most of the sound absorption field, is made from 70% recycled PET plastic bottle material, so this highly technical product is also very environmentally friendly.

The lightweight material design, coupled with beautifully engineered ‘easy-mount’ hardware, means the HALO is quick and easy to set up, stable on mic stands, and sounds and looks fantastic.

 

Additional information
  • Name
    Aston Microphones Spirit & Halo Reflection Filter - Bundle offer
  • Product type
    Microphone
  • Manufacturer
    Aston Microphones
  • Condition
    new
  • MPN
    AST-SPIRIT
  • EAN
    5060458750013
  • Model
    Spirit
Shipping and Warranty

    We ship worldwide on daily basis, with DHL, DPD, FedEx and freight carrier. All in-stock items are usually shipped within 24h upon receipt of payment, mostly on the same working day. Of course, all orders are checked by our qualified personnel and professionally packaged for shipping. Express delivery options are available upon request.

    We stand behind the flawless quality and function of our products and provide you an extended warranty of 3 years for regular brand new items, as well as 2 years for B-stock or demo items and 1 year for second hand equipment.

Accessories

Related products