Two Notes Torpedo Live

Lighter than the Torpedo Studio and beautifully designed, the Torpedo Live is a digital loadbox perfectly fit to be used on stage.

You love the sound of your amplifier pushed right to the magic sweet spot where the best tones are. Until now, the only available option was blasting your sound through a 4×12″ to properly excite a microphone. Enter Torpedo, the simplest and most realistic way to get your sound to your audience. Use the amp you love!
Everything that makes a real amp rule over all the other alternatives is retained. You can even record silently late at night. Gone is the backache from the loadout, complaints from neighbours, venue staff or even bandmates and the frustration of not being able to sound at one’s best trying to reduce the volume.

Exclusive Torpedo technology

Highly realistic speaker simulation is achieved by use of convolution. Two notes started from that technology and brought it much further, to accurately reproduce the characteristics of the whole miking chain (speaker, microphone, preamplifier, studio room acoustic).
Many parameters influence the sound of your guitar or bass rig when it comes to recording. Taking good care of the cabinet selection and miking will dramatically improve the sound of your takes. The Torpedo simulation reproduces the tiniest variations of a cabinet behaviour (such as its frequency response). Move the microphone in the virtual studio room thanks to the Torpedo IR synthesis: all the settings you need to achieve great recordings are here.

Connect your guitar or bass and effects to your amplifier as you are used to, then connect your amp to the Torpedo Live instead of a speaker cabinet. The Torpedo Live can then be connected to a mixing board and PA, or to a sound interface for recording, in the studio or at home. You can also use headphones for direct monitoring. An optional speaker cabinet can be connected to the Thru output.
You can also use the Torpedo Live with a preamplifier, or as an external effect processor in a studio or home studio environment.

Specifications

Reactive loadbox:

• Input impedance: 8 Ohms
• Admissible power: 100W RMS
• Cooled by temperature-controlled fan and active thermal security: the amp and musician work in security.

Inputs / Outputs:

• Speaker Input: 1/4″ Jack unbalanced (TS, Tip/Sleeve)
• Speaker Thru: 1/4″ Jack unbalanced (TS) – Directly connected to Speaker Input. Disconnects the loadbox when used.
• Line Input: 1/4″ Jack balanced (TRS, Tip/Ring/Sleeve) – Max level: 36 dBu – Impedance: 10 kOhms
• Line Output: 1/4″ Jack balanced (TRS) – Max level: 16 dBu – Impedance: 470 Ohms
• Phones: 1/4″ Jack stereo (TRS)
• S/PDIF output
• MIDI input
• USB connector

Digital audio:

• 24 bits / 96 kHz converters
• Bandwidth (-1dB): 5Hz – 19 kHz
• Signal/Noise ratio: > 95 dB
• Internal processing at 32 bits
• Latency: 1.7 ms (Line Input à Line Output)

Power:

• IEC type C14 connector
• Input voltage: 85-264 Volts AC, 47-63 Hz
• Power consumption: approx. 10W

Dimensions & weight:

• Width x Depth x Height: 483 x 189 x 44 (mm)
• Weight: 2 kg