Walrus Audio Meraki Stereo Analog Delay
Meraki Stereo Analog Delay uses 8 MN3005 chips to create warm, rich repeats. Capable of 1200ms of delay time with parallel, ping-pong and series delay modes. Independently control the delay times and modulation of the left and right channels to create syncopated repeats or keep them locked into the same timing for classic repeat sounds.
- Stereo Analog Delay
- Uses 8 MN3005 chips to create warm, rich repeats.
- Capable of up to 1200ms of delay
- Parallel, ping-pong, and series delay modes
- Independently control the delay times and modulation of the left and right channel
- Create syncopated or classic repeat sounds.
- Delay time ranges from 80 – 1200 ms
- Independent division control for left and right channel: quarter, eighth, or dotted eighth note repeats.
- Use Tone control to adjust a Tilt EQ on the repeats: cut highs / boost lows to boost highs / cut lows.
- Selectable modulation wave shapes: Sine, Square, and Random
- Adjust modulation out-of-phase setting for the right channel: 0, 90, or 180 degrees.
- Parallel Delay Mode: Left and Right paths are independent of each other.
- Ping-Pong Delay Mode: Repeats bounce from one side to another.
- Series Delay Mode: Create interesting, syncopated delay rhythms.
- Change between trails or no-trails mode (repeats stop abruptly when the delay effect is turned off)
- Tap Tempo switch to set the delay time.
- Press and hold Tap Tempo switch to maximize feedback in the left and right channel (oscillation)
- MIDI DIN Input and Output sockets
- Remote controllable via MIDI for even more creative usage
- External Tap / Expression pedal input
- Use Expression pedal to control time or modulation depth
- Power requirement: 9V DC, 500 mA center-negative
- Made in the USA