Fender American Professional II Stratocaster Neck - 22 Narrow Tall Frets - 9.5" Radius - Maple
Crafted in the same facility as our U.S.-made instruments, the American Professional II Stratocaster Neck draws from more than sixty years of innovation, inspiration and evolution to meet the demands of today’s working player. Our popular Deep “C” neck now sports smooth rolled fingerboard edges and a “Super-Natural” satin finish that provides a supremely comfortable feel. Other features include a 9.5"-radius maple or rosewood fingerboard, bone nut and 22 narrow-tall frets for easy bending.
The neck pocket has 4 offset pre-drilled pilot holes so if it is being installed on a standard body, a fifth pilot hole will need to be drilled. This replacement neck is for a Fender or Squier by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
Main Features:
Fingerboard Radius: 9.5" (241 mm)
Refinement Fingerboard Radius: Modern
Fret Size: Narrow Tall
Neck Material: Maple
Neck Shape: Deep "C"
Refinement Neck Shape: C Shape
Number of Frets: 22
Nut Material: Bone
Nut Width: 1.685" (42.8 mm)
Scale Length: 25.5" (648 mm)
Truss Rod: Bi-Flex™
Truss Rod Nut: 1/8" Hex Adjustment
Neck Thickness: 1st Fret - .820" (20.82 mm), 12th Fret - .920" (22.86 mm)
Neck Mounting: 4-Bolt Offset
Tuner Mounting Config: Dual Guide Pin
Instrument Type: Stratocaster
Peg Hole Diameter: .404” (10.26 mm)
Headstock Thickness: .540” (13.71 mm)
